De Terrain Tamer ELocker Kit is speciaal ontworpen om te helpen bij de montage van de Harrop Eaton Elcker, bestaande uit alle benodigde lagers en pakkingen, evenals de unit zelf. +

De gepatenteerde elektronische systemen met 4 rondsels zijn gemaakt in Australië en werken handmatig met behulp van een elektromagneet die wordt aangedreven door de batterij van het voertuig, waardoor de compressortechnologie wordt vervangen en de bestuurder de controle heeft om de differentiëlen indien nodig te vergrendelen of ontgrendelen met een drukknopactivering.

Wanneer vergrendeld, de ELocker presteert als een volledige locker, vangt 100% van het beschikbare koppel op en stuurt dit gelijk naar beide uiteinden van de as, waardoor de beschikbare tractie wordt gemaximaliseerd, meer controle wordt geboden en het momentum wordt verminderd dat nodig is bij het naderen van potentieel gevaarlijke obstakels zoals het beklimmen van heuvels.

Ontworpen met precisie gesmede tandwielen van Eaton, bedoeld voor zware toepassingen en biedt verbeterde sterkte en duurzaamheid ten opzichte van standaard gesneden tandwielen, eLockers zijn uitdrukkelijk ontworpen voor: 4WD onderdelen en wordt geleverd met 3 jaar fabrieksgarantie.

Verkrijgbaar voor zowel voor als achter, de ELocker werkt op een zodanige manier dat beide assen onafhankelijk blijven en kan eenvoudig worden gemonteerd met een eenvoudig montageproces. De units gebruiken geen verbruiksonderdelen zoals O-ringen, dus vergen minder onderhoud en het elektromagnetische vergrendelingsmechanisme elimineert de complicaties en kosten die gepaard gaan met het runnen van een compressor en aanverwante luchtvaartmaatschappijen. In plaats daarvan wordt het apparaat aangesloten met slechts twee draden met stof- en waterdichte stekkers, wat eenvoud en reparatiegemak biedt in geval van schade. Sluiten

De Terrain Tamer Differential Locking Kit bevat alle vereiste lagers en pakkingen plus de in Australië gemaakte Harrop Eaton ELocker.

De Harrop Eaton ELocker is een elektromagnetisch sperdifferentieel, waarvoor geen compressor of luchtleidingen nodig zijn, dat handmatig door de bestuurder wordt ingeschakeld met een aan/uit-schakelaar. Intern zijn de gepatenteerde Eaton-tandwielen gesmeed en hebben ze een sterk ontwerp met 4 rondsels. de Harrop Eaton ELocker heeft een eenvoudig 'drop-in' montageproces en laat de voor- en achteras onafhankelijk van elkaar vergrendelen.

  • Gemaakt in Australië
  • Handmatig geselecteerd
  • Elektronisch geactiveerd

 Terrain Tamer E-Locker Montagehandleiding PDF  Vraag een offerte aan

 

De Harrop Eaton ELockers die door Terrain Tamer als kit worden verkocht, met alle vereiste zijlagers, zijn betrouwbare elektronische, selecteerbare differentiëlen, voorzien van elektromagnetische vergrendelingstechnologie en een gesmeed tandwielontwerp met 4 rondsels voor extra sterkte, bedoeld voor 4WD bestuurders die tractie op aanvraag nodig hebben.

Wanneer ontgrendeld, werkt een ELocker als een open differentieel, waardoor extra vermogen wordt overgebracht naar het wiel met de minste weerstand, en de wielen kunnen met verschillende snelheden draaien.

Wanneer de bestuurder echter onmiddellijke tractie nodig heeft, kan hij eenvoudigweg een schakelaar omdraaien, waardoor de elektromagneet wordt geactiveerd, die de borgpennen achter in de zijversnelling op hun plaats duwt en het differentieel wordt vergrendeld, waardoor 100% van het beschikbare koppel wordt opgevangen. het gelijk aan beide uiteinden van de as, ongeacht het verschil in tractie, en dwingt de wielen om met dezelfde snelheid te draaien.

Een open differentieel is vereist voor algemeen gebruik op de weg, aangezien een buitenband verder rijdt dan het binnenste wiel in bochten, maar wanneer een bestuurder in een situatie met weinig tractie is, zoals proberen door modder te rijden of over een rotsblok te klimmen en er slechts één band is stroom krijgt, is vaak een kluisje nodig.

ELockers gebruiken een elektronische schakelaar in het dashboard om een ​​set magneten te bedienen die ervoor zorgen dat een rolnokken in pennen grijpen die in de zijversnelling duwen, waardoor het differentieel wordt vergrendeld.

Dit is het belangrijkste voordeel van een eLocker: er is geen externe stroombron nodig naast de standaard 12 volt, en er is geen ingebouwde luchtcompressor nodig om te werken, zoals bij luchtkasten.

Dit maakt ELockers aanzienlijk betrouwbaarder en daarom hebben ze voor velen de voorkeursoptie 4WD eigenaren.

ELockers worden geactiveerd door een op het dashboard of op de console gemonteerde schakelaar. Elke geschikte 12VDC-schakelaar zal werken, maar de vereiste kabelboom met een relaisschakelaar, een elektrische beveiligingsdiode van het chassis en de zekering wordt meegeleverd met alle Terrain Tamer ELocker-kits.

De Harrop Eaton ELocker is een open differentieel met elektronisch gestuurde vergrendelingsfuncties en hoewel het ontwerp van de vergrendelingscomponenten verschilt tussen modellen en generaties ontwerpen, werken ze allemaal door een van de zijversnellingen op het differentieelhuis te vergrendelen.

Wanneer de ELocker wordt ingeschakeld via de schakelaar op het dashboard, vergrendelt het elektromagnetische mechanisme volledig, waardoor 100% van het beschikbare koppel gelijkmatig naar beide wielen wordt gestuurd.

Technisch gezien kan een ELocker tijdens het rijden worden ingeschakeld, maar u moet er wel op letten dat het wielsnelheidsverschil (tussen het rechter- en linkerwiel) onder de 50 toeren blijft. Het wordt daarom aanbevolen dat een bestuurder een ELocker alleen inschakelt wanneer de voertuigsnelheid lager is dan 5 km/u.

Hoewel ELocker bedoeld is voor intensief gebruik, zullen constant misbruik en extreme snelheidsinschakeling de levensduur van de ELocker aanzienlijk verkorten en wordt dit niet gedekt door de garantie.

Wanneer de ELocker is ingeschakeld, probeert het onmiddellijk de wielsnelheden te vergrendelen en aan te passen, en als gevolg daarvan moet het differentieel het langzaam draaiende wiel, de asas en de remcomponentmassa onmiddellijk versnellen tot dezelfde snelheid als het vrijdraaiende wiel.

Dit is niet alleen hard voor het differentieel; het is ook ongelooflijk hard op de steekas.

 

TOYOTA - Harrop ELocker Geschikt voor Toyota Voertuigen

 

Make & ModelYEARFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECrown Wheel TorqueBearing Cap TorqueBack LashCommentsTerrain Tamer Differential KitSTORE 
Landcruiser        
40 Series 1969-1984 FRONT  Live 30 A9378 BUY NOW TTEL01 BUY NOW 120Nm (89ftlb) 110Nm (81ftlb) 0.15-0.20mm (.006-.008") Early models will require upgrade to 50mm bearing A9378-1TT BUY NOW
    REAR Live 30 A9378 BUY NOW TTEL01 BUY NOW 120Nm (89ftlb) 110Nm (81ftlb) 0.15-0.20mm (.006-.008") Early models will require upgrade to 50mm bearing A9378-1TT BUY NOW
60 Series 1980-1990 FRONT Live 30 A9378 BUY NOW TTEL01 BUY NOW 120Nm (89ftlb) 110Nm (81ftlb) 0.15-0.20mm (.006-.008")    A9378-1TT BUY NOW
    REAR Live 30 A9378 BUY NOW TTEL01 BUY NOW 120Nm (89ftlb) 110Nm (81ftlb) 0.15-0.20mm (.006-.008")    A9378-1TT BUY NOW
LJ70, RJ70 1984- FRONT Live 30 A9334 BUY NOW TTEL07 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.20mm (.006-.008")   A9334-7TT BUY NOW
    REAR Live 30 A9334 BUY NOW TTEL05 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.20mm (.006-.008")   A9334-7TT BUY NOW
70,71,73,74,75 Series 1984-1990 FRONT Live 30 A9378 BUY NOW TTEL01 BUY NOW 120Nm (89ftlb) 110Nm (81ftlb) 0.15-0.20mm (.006-.008")    A9378-1TT BUY NOW
    REAR Live 30 A9378 BUY NOW TTEL01 BUY NOW 120Nm (89ftlb) 110Nm (81ftlb) 0.15-0.20mm (.006-.008")    A9378-1TT BUY NOW
70, 73, 75 Series 1990-1999 FRONT Live  30 A9334 BUY NOW TTEL02 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010")   A9334-2TT BUY NOW
    REAR Live  30 A9378 BUY NOW TTEL03 BUY NOW 120Nm (89ftlb) 110Nm (81ftlb) 0.15-0.20mm (.006-.008")   A9378-3TT BUY NOW
76, 78 79 series 1999-Current FRONT Live 30 A9334 BUY NOW TTEL02 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010")   A9334-2TT BUY NOW
    REAR Live 32 A9574 BUY NOW TTEL04 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010")   A9574-4TT BUY NOW
80 Series 1990-1998 FRONT Live 30 A9334 BUY NOW TTEL02 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010")   A9334-2TT BUY NOW
    REAR Live 30 A9378 BUY NOW TTEL03 BUY NOW 120Nm (89ftlb) 110Nm (81ftlb) 0.15-0.20mm (.006-.008")   A9378-3TT BUY NOW
100 Series 1998-2006 FRONT Independent 30 A10976 BUY NOW TTEL12 BUY NOW 96Nm (71ftlb) 85Nm (63ftlb) 0.13-0.18mm (.005-.007")   A10976-12TT BUY NOW
    REAR Live 32 A9574 BUY NOW TTEL04 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010")   A9574-4TT BUY NOW
105 Series  1998-2006  FRONT Live 30 A9334 BUY NOW TTEL02 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010")   A9334-2TT BUY NOW
    REAR Live 32 A9574 BUY NOW TTEL04 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010")   A9574-4TT BUY NOW
200 Series  2007-2015   FRONT Independent 34 A11092 BUY NOW TTEL13 BUY NOW 135Nm (100ftlb)   0.15-0.25mm (.006-.010")   A11092-13TT BUY NOW
    REAR Live 32 A9574 BUY NOW TTEL04 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010")   A9574-4TT BUY NOW
300 Series  2022-  FRONT Independent 36 A15729 BUY NOW TTEL30 BUY NOW       Suits non-factory diff lock A15729-30TT BUY NOW
    REAR Live 32 A15736 BUY NOW TTEL31 BUY NOW       Suits non-factory diff lock A15736-31TT BUY NOW
Landcruiser /  Prado        
90 Series  1996-2002  FRONT Independent 27 A11167 BUY NOW TTEL06 BUY NOW 96Nm (71ftlb) 85Nm (63ftlb) 0.13-0.17 (.005-.007") Some light grinding may be required to clear electromagnet A11167-6TT BUY NOW
    REAR Live 30 A9334 BUY NOW TTEL14 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010")    A9334-14TT BUY NOW
120 Series   2002-2009   FRONT Independent  30 A10994 BUY NOW TTEL09 BUY NOW 95Nm (70ftlb)   0.15-0.25mm (.006-.010") 3.73 & down ratio, may require grinding in housing to seat electromagnet A10994-9TT BUY NOW
          A11110 BUY NOW TTEL09 BUY NOW 95Nm (70ftlb)   0.15-0.25mm (.006-.010") 3.93 & up ratio ,may require grinding in housing to seat electromagnet A11110-9TT BUY NOW
    REAR Live 30 A9334 BUY NOW TTEL14 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010")    A9334-14TT BUY NOW
150 Series   2009-   FRONT Independent 30 A11110 BUY NOW TTEL09 BUY NOW 95Nm (70ftlb)   0.15-0.25mm (.006-.010") Ratio 3.93 & UpDiesel may require grinding in housing to seat electromagnet A11110-9TT BUY NOW
          A10994 BUY NOW  TTEL09 BUY NOW 95Nm (70ftlb)   0.15-0.25mm (.006-.010")   A10994-9TT BUY NOW
    REAR Live 30 A11114 BUY NOW TTEL17 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010") Suits non factory diff lock  A11114-17TT BUY NOW
          A16144 BUY NOW TTEL17 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010") Suits factory diff lock replacement A16144-17TT BUY NOW
Hilux / Surf / 4Runner/ Fortuner        
   2015-    FRONT Independent 30 A10994 BUY NOW TTEL32 BUY NOW 95Nm (70ftlb)   0.15-0.25mm (.006-.010") Ratio 3.73 & Down may require grinding in housing to seat electromagnet. A10994-32TT BUY NOW
    FRONT Independent 30 A11110 BUY NOW TTEL32 BUY NOW 95Nm (70ftlb)   0.15-0.25mm (.006-.010") Ratio 3.93 & Up may require grinding in housing to seat electromagnet. A11110-32TT BUY NOW
    REAR Live 32 A14334 BUY NOW TTEL26 BUY NOW       Suits factory diff lock replacement  A14334-26TT BUY NOW
  2004-2014 FRONT Independent 30 A10994 BUY NOW TTEL09 BUY NOW 95Nm (70ftlb)   0.15-0.25mm (.006-.010") Ratio 3.73 & Down may require grinding in housing to seat electromagnet Suits clamshell housing A10994-9TT BUY NOW
     FRONT Independent 30 A11110 BUY NOW TTEL09 BUY NOW 95Nm (70ftlb)   0.15-0.25mm (.006-.010") Ratio 3.91 & Up may require grinding in housing to seat electromagnet Suits clamshell housing A11110-9TT BUY NOW
    REAR Live 30 A9334 BUY NOW TTEL14 BUY NOW       Late model vehicles require bearing upgrade from 45mm-50mm A9334-14TT BUY NOW
    REAR Live 30 A13412 BUY NOW           OS Model Variant Dana Spicer shim adjusted housing    
  1988-2005 FRONT Independent 27 A11444 BUY NOW TTEL06 BUY NOW       Suits 33mm output shaft or manual locking hubs,non clamshell housing A11444-6TT BUY NOW
    FRONT Independent 27 A11412 BUY NOW TTEL06 BUY NOW 96Nm (71ftlb)   0.13-0.18mm (.005-.007") Suits non clamshell housing A11412-6TT BUY NOW
    FRONT Independent 27 A11167 BUY NOW TTEL06 BUY NOW 96Nm (71ftlb)   0.13-0.18mm (.005-.007") Suits clamshell housing A11167-6TT BUY NOW
    REAR Live  30 A9334 BUY NOW TTEL05 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010") 80mm OD Hemisphere Bearing  A9334-5TT BUY NOW
    REAR Live 30 A9334 BUY NOW TTEL14 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb) 0.15-0.25mm (.006-.010") 83mm OD Hemisphere Bearing  A9334-14TT BUY NOW
  1981-1997 FRONT Live 30 A9334 BUY NOW TTEL07 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb)  0.15-0.25mm (.006-.010")   A9334-7TT BUY NOW
    REAR Live 30 A9334 BUY NOW TTEL05 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb)  0.15-0.25mm (.006-.010")   A9334-5TT BUY NOW
Hiace        
H100 / H200 1989-2016 REAR Live 30 A9334 BUY NOW TTEL14 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb)   0.15-0.25mm (.006-.010") Suits 10 bolt Crown wheel diameter 8.9" 3.58:1 ratio A9334-14TT BUY NOW
H200 / H300 2016- REAR Live 32 A16636   TTEL14   95Nm (70ftlb) 95Nm (70ftlb)   0.15-0.25mm (.006-.010") Suits Crown wheel diameter 8.9" 3.58:1 ratio A16636-14TT  
FJ Cruiser        
GSJ15 2005-2016 FRONT Independent 30 A10994 BUY NOW TTEL09 BUY NOW 95Nm (70ftlb)    0.15-0.25mm (.006-.010") Ratio 3.73 & Down may require grinding in housing to seat electromagnet will not suit models with OEM locker A10994-9TT BUY NOW
    FRONT Independent 30 A11110 BUY NOW TTEL09 BUY NOW 95Nm (70ftlb)    0.15-0.25mm (.006-.010") Ratio 3.91 & Up may require grinding in housing to seat electromagnet will not suit models with OEM locker A11110-9TT BUY NOW
    REAR Live 30 A9334 BUY NOW TTEL14 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb)  0.15-0.25mm (.006-.010") Suits 10 bolt Crown wheel will not suit models with OEM locker    
Tacoma USA        
  1995-2004 Front IFS 27 A11167 BUY NOW TTEL14 BUY NOW 96Nm (71ftlb) 85Nm (63ftlb) 0.13-0.18mm (.005-.007") Suits clamshell housing A11167-14TT BUY NOW
    Rear Live   A13457 BUY NOW TTEL15 BUY NOW 96Nm (71ftlb) 85Nm (63ftlb) 0.13-0.18mm (.005-.007")   A13457-15TT BUY NOW
  2005- Front IFS 30 A10994 BUY NOW TTEL15 BUY NOW 95Nm (70ftlb)    0.15-0.25mm (.006-.010") Ratio 3.73 & Down housing may require grinding to seat electro magnet A10994-15TT BUY NOW
    Front IFS 30 A11110 BUY NOW TTEL16 BUY NOW 95Nm (70ftlb)    0.15-0.25mm (.006-.010") Ratio 3.93 & Up housing may require grinding to seat electro magnet A11110-16TT BUY NOW
  1995-2015 Rear Live 30 A13457 BUY NOW TTEL17 BUY NOW 96Nm (71ftlb) 85Nm (63ftlb) 0.13-0.18mm (.005-.007")   A13457-17TT BUY NOW
  2016- Rear Live 30 A9334 BUY NOW TTEL14 BUY NOW 95Nm (70ftlb) 95Nm (70ftlb)  0.15-0.25mm (.006-.010") 8" Crownwheel suits all autos excluding OE factory locked A9334-14TT BUY NOW
Sequoia, T-100 & Tundra        
  1993-1998 Front IFS 27 A11412 BUY NOW     96Nm (71ftlb)   0.13-0.18mm (.005-.007") Suits non-clamshell type housing    
  1999-2006 Front IFS 27 A11167 BUY NOW     96Nm (71ftlb) 85Nm (63ftlb) 0.13-0.18mm (.005-.007") Suits clamshell type housing    
  2007- Front IFS 34 A11092 BUY NOW TTEL13 BUY NOW 135Nm (100ftlb)    0.15-0.25mm (.006-.010")   A11092-13TT BUY NOW
  1993-2006 Rear Live 30 A13457 BUY NOW     96Nm (71ftlb) 85Nm (63ftlb)  0.15-0.25mm (.006-.010")      
  2007- Rear Live 30 A13971             10.5" Crownwheel    

NISSAN - Harrop ELocker Geschikt voor Nissan Voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECrown Wheel TorqueBearing Cap TorqueBack LashCommentsTerrain Tamer Differential KitSTORE
Patrol
GQ Y60-GU Y61 1998-2016 FRONT Live 31 A9684 BUY NOW TTEL10 BUY NOW 142Nm (105ftlb) 99Nm (73ftlb) 0.15-0.20mm (.006-.008") # TTEL10 will be required to suit 50mm bearing journal up-grade A9684-10TT BUY NOW
    REAR Live 33 A9635 BUY NOW TTEL10 BUY NOW 142Nm (105ftlb) 99Nm (73ftlb) 0.15-0.20mm (.006-.008") Will not suit vehicles with OEM Locker A9635-10TT BUY NOW
    REAR Live 33 A13583 BUY NOW  TTEL10 BUY NOW 142Nm (105ftlb) 99Nm (73ftlb) 0.15-0.20mm (.006-.008") Replacement for OEM Locking Differential  A13583-10TT BUY NOW
    REAR Live 34 A13281 BUY NOW     212Nm (156ftlb) 88Nm (55ftlb) 0.15-0.20mm (.006-.008") Suits H260 housing    
    REAR Live 37 A13092 BUY NOW     212Nm (156ftlb) 88Nm (55ftlb) 0.15-0.20mm (.006-.008") Suits H260 housing    
Y62 2010-2018 FRONT Independent 34 A12539 BUY NOW     203Nm (150ftlb) 135Nm (100ftlb) 0.15-0.20mm (.006-.008") Confirm Spline Count    
Navara
D21-D22 1986-2016 FRONT Independent 27 A11250 BUY NOW TTEL15 BUY NOW 69-78Nm (51-58ftlb)   0.10-0.15 (.004-.006") Housing & pinion may require modification A11250-15TT BUY NOW
    REAR Live 31 A11257 BUY NOW TTEL16 BUY NOW       Ratio 4.11 & Up Wheel bearing pre load must be checked post fittment A11257-16TT BUY NOW
    REAR Live 31 A13620 BUY NOW TTEL16 BUY NOW       Ratio 3.9 & Down Wheel bearing pre load must be checked post fittment A13620-16TT BUY NOW
    REAR Live 31 A11825 BUY NOW TTEL16 BUY NOW       Suits H233B housings A11825-16TT BUY NOW
D40 2005-2016 FRONT Independent 27  A11120 BUY NOW TTEL20   BUY NOW Then turn an additonal 93Nm (69ftlb) 93Nm 0.10-0.15mm (.004-.006") Ratio 3.69 & Up Crown wheel must be fitted prior to electromagnet A11120-20TT BUY NOW
    FRONT Independent 27  A11525 BUY NOW TTEL20 BUY NOW Then turn an additonal 93Nm (69ftlb) 93Nm 0.10-0.15mm (.004-.006") Ratio 3.54 & Down Crown wheel must be fitted prior to electromagnet A11525-20TT BUY NOW
    REAR Live 32  A11119 BUY NOW TTEL21 BUY NOW       Suits 12-bolt crown wheel (Thai built. VIN Number start with MNT) A11119-21TT BUY NOW
     REAR Live 32  A11568 BUY NOW TTEL21 BUY NOW       Suits 10-bolt crown wheel (spanish built VIN start with VSK) A11568-21TT BUY NOW
D23 NP300 2014-2019 Front Independent 30 A13120 BUY NOW TTEL 20 BUY NOW Then turn an additonal 93Nm (69ftlb) 93Nm 0.10-0.15mm (.004-.006") Ratio 3.24 & Down  A13120-20TT BUY NOW
    Front Independent 30 A13684 BUY NOW TTEL 20 BUY NOW Then turn an additonal 93Nm (69ftlb) 93Nm 0.10-0.15mm (.004-.006") Ratio 3.69 & Up  A13684-20TT BUY NOW
    Rear Live 34 A14799 BUY NOW TTEL27 BUY NOW       Ratio 3.69 & Up - Does not suit vehicles with OEM locking differential   A14799-27TT BUY NOW
Frontier
D40 2005-2016 FRONT Independent 27  A11120 BUY NOW TTEL20 BUY NOW Then turn an additonal 93Nm (69ftlb) 93Nm 0.10-0.15mm (.004-.006") Ratio 3.69 & Up Crown wheel must be fitted prior to electromagnet A11120-20TT BUY NOW
    FRONT Independent 27  A11525 BUY NOW TTEL20 BUY NOW Then turn an additonal 93Nm (69ftlb) 93Nm 0.10-0.15mm (.004-.006") Ratio 3.54 & Down Crown wheel must be fitted prior to electromagnet A11525-20TT BUY NOW
    REAR Live 32  A11119 BUY NOW TTEL21 BUY NOW 198Nm  (146ftlb 108Nm (80ftlb) 0.08-.013mm (.003-.005") Suits 12-bolt crown wheel (Thai built. VIN Number start with MNT) A11119-21TT BUY NOW
    REAR Live 32  A11568 BUY NOW TTEL21 BUY NOW 198Nm  (146ftlb 108Nm (80ftlb) 0.08-.013mm (.003-.005") Crown wheel (spanish built VIN start with VSK) A11568-21TT BUY NOW
Pathfinder
R50 1995-2005 Front Independent 27 A11250 BUY NOW TTEL15 BUY NOW 69-78Nm (51-58ftlb)   0.010-0.15mm (.004-.006") Light grinding required to housing to clear Elocker. Ensure there is clearance between pinion head and Elocker body. Pinion head can be shaved down slightly to clear. A11250-15TT BUY NOW
    REAR Live 33 A9635 BUY NOW TTEL10 BUY NOW 142Nm (105ftlb) 99Nm (73ftlb) 0.15-0.20mm (.006-.008") TTEL10 will be required to suit 50mm bearing journal on ELocker will not suit vehicles with rear drum brakes A9635-10TT BUY NOW
R51 2005-2014 FRONT Independent 27  A11120 BUY NOW  TTEL20 BUY NOW Then turn an additonal 93Nm (69ftlb) 93Nm (0.10-0.15mm (.004-.006") Ratio 3.69 & Up Crown wheel must be fitted prior to electromagnet A11120-20TT BUY NOW
          A11525 BUY NOW  TTEL20 BUY NOW Then turn an additonal 93Nm (69ftlb) 93Nm (0.10-0.15mm (.004-.006") Ratio 3.54 & Down Crown wheel must be fitted prior to electromagnet A11525-20TT BUY NOW
    REAR Independent 33 A12352 BUY NOW           Ratio 3.54 & Up    
    REAR Independent 33 A13238 BUY NOW           Ratio 3.36 & Down    
Terrano 2 
R20 1993-2006 REAR Live 31 A9684 BUY NOW TTEL10 BUY NOW 142Nm (105ftlb) 99Nm (73ftlb) 0.15-0.20mm (.006-.008") P/N# TTEL10 will be required to suit 50mm bearing journal up-grade A9684-10TT BUY NOW
    REAR Live 33 A9635 BUY NOW TTEL10 BUY NOW 142Nm (105ftlb) 99Nm (73ftlb) 0.15-0.20mm (.006-.008") P/N# TTEL10 will be required to suit 50mm bearing journal up-grade does not suit models with rear drum brakes A9635-10TT BUY NOW

FIAT - Harrop ELocker Geschikt voor Fiat Voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECrown Wheel TorqueBearing Wheel TorqueBack LashCommentsTerrain Tamer Differential KitSTORE
Fullback 2016- FRONT Independent 28 A11425 BUY NOW TTEL33 BUY NOW 85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Will not suit 7.25 Crown Wheel  A11425-33TT BUY NOW
    REAR Live 31 A11428 BUY NOW TTEL19 BUY NOW 152Nm (112ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") 9.5" Crown Wheel A11428-19TT BUY NOW

FORD - Harrop ELocker Geschikt voor Ford voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECrown Wheel TorqueBearing Wheel TorqueBack LashCommentsTerrain Tamer Differential KitSTORE
Everest
UA 2015-2018 FRONT Independent 29 A11757 BUY NOW TTEL24 BUY NOW 135Nm (100ftlb)   0.35-0.45mm (.013-.017) off Pinio Bearing journal sizes differ left to right (50.05/45.32) A11757-24TT BUY NOW
UA 2 2018- FRONT Independent   A14408 BUY NOW TTEL24 BUY NOW 135Nm (100ftlb)   0.35-0.45mm (.013-.017) off Pinio As above. Housing may require grinding to electro magnet seat A14408-24  
Ranger                            
PJ & PK 2006-2011 FRONT Independent 30 A11474 BUY NOW  TTEL23 BUY NOW 68-83Nm (51-62ftlb) 73-107Nm (84-79ftlb) 0.09-0.11mm (.0035-.0043")    A11474-23TT BUY NOW
    REAR Live 32 A11471 BUY NOW  TTEL22 BUY NOW 95Nm (70ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010")    A11471-22TT BUY NOW
PX/PX2 (T6) 2011-7/2018 FRONT Independent 29 A11757 BUY NOW  TTEL24 BUY NOW 135Nm (100ftlb)   0.35-0.45mm (.013-.017) off Pinio Bearing journal sizes differ left to right (50.05/45.32)   A11757-24TT BUY NOW
PX3 P703 & Raptor 8/2018- FRONT Independent 29 A14408 BUY NOW TTEL24 BUY NOW 135Nm (100ftlb)   0.35-0.45mm (.013-.017) off Pinio Also suits PX3 Raptor Ranger Bearing journal sizes differ left to right, housing may require grinding to electro magnet seat A14408-24TT BUY NOW
  2023-2024 FRONT Independent 29 A16596 BUY NOW TTEL24 BUY NOW 135Nm (100ftlb)   0.35-0.45mm (.013-.017) off Pinio Suits 2023-2024 Next Gen Ranger XL 4.11:1 Ratio A16596-24TT BUY NOW
PX/PX2 (T6) PX3 P703 2011-Current REAR Live 32 A12608 BUY NOW  TTEL28 BUY NOW 150Nm (110ftlb) 75Nm (55ftlb) 0.15-0.25mm (.006-.010") Does not suit vehicles with OEM locking differentials  A12608-28TT BUY NOW
Maverick 1988-1997 FRONT Live 31 A9684 BUY NOW TTEL10 BUY NOW 142Nm (105ftlb) 99Nm (73ftlb) 0.15-0.20mm (.006-.008") P/N# TTEL10 will be required-suit 50mm bearing journal up-grade. A9684-10TT BUY NOW
    REAR Live 33 A9635 BUY NOW TTEL10 BUY NOW 142Nm (105ftlb) 99Nm (73ftlb) 0.15-0.20mm (.006-.008") Does not suit models with rear drum brakes. A9635-10TT BUY NOW

ISUZU - Harrop Eaton ELocker Geschikt voor Isuzu Voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECrown Wheel TorqueBearing Wheel TorqueBack LashCommentsTerrain Tamer Differential KitSTORE
Dmax & MU-X 2008-2019 FRONT Independent 17 A11556 BUY NOW TTEL11 BUY NOW 107Nm (79ftlb) 98Nm (72ftlb) 0.15-0.20mm (.006-.008")   A11556-11TT BUY NOW
    REAR Live 26 A11559 BUY NOW TTEL18 BUY NOW 108Nm (80ftlb) 108Nm (80ftlb) 0.15-0.20mm (.006-.008") Does suit vehicles with OEM diff lock, however due to Isuzu casting differences this may require a different size shim to set the pre-load. A11559-18TT BUY NOW
  2020- FRONT IFS 29 A15305 BUY NOW TTEL11 BUY NOW            
MU-X  2014-2018 FRONT Independent 17 A11556 BUY NOW TTEL11 BUY NOW 107Nm (79ftlb) 98Nm (72ftlb) 0.15-0.20mm (.006-.008")   A11556-11TT BUY NOW
    REAR Live 26 A11559 BUY NOW TTEL18 BUY NOW 108Nm (80ftlb) 108Nm (80ftlb) 0.15-0.20mm (.006-.008") Due to Isuzu casting differences this may require a different size shim to set the pre-load. A11559-18TT BUY NOW
Faster & Rodeo 1988-2007 FRONT Independent 17 A11556 BUY NOW TTEL11 BUY NOW       Does not suit some Rodeo's between 12/96 & 5/98 due to a different 3rd member and carrier. To get it to fit you can swap member out for an earlier one. A11556-11TT BUY NOW
    REAR Live 26 A11559 BUY NOW TTEL18 BUY NOW       Due to Isuzu casting differences this may require a different size shim to set the pre-load. A11559-18TT BUY NOW
       Live 26 A12924 BUY NOW           Suits Vehicles with Thrust Block Centre    
NPS250 & NPS300 2009-2016 FRONT Live  23 A15171                  

HOLDEN - Harrop ELocker Geschikt voor Holden-voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECrown Wheel TorqueBearing Wheel TorqueBack LashCommentsTerrain Tamer Differential KitSTORE
Colorado
RC 2008-2011 FRONT Independent 17 A11556 BUY NOW TTEL11 BUY NOW 107Nm (79ftlb) 98Nm (72ftlb) 0.15-0.20mm (.006-.008")   A11556-11TT BUY NOW
    REAR Live 26 A11559 BUY NOW TTEL18 BUY NOW 108Nm (80ftlb) 108Nm (80ftlb) 0.15-0.20mm (.006-.008") Due to Isuzu casting differences this may require a different size shim to set the pre-load. A11559-18TT BUY NOW
RG/Colorado7 & Trailblazer 2012-2020 FRONT Independent 28 A11887 BUY NOW  TTEL25 BUY NOW 120Nm (89ftlb) 63Nm (46ftlb) Alum 75Nm (55ftlb) Cast   Pre-load shim & baffle modification see instructions, LM102949 Cone & LM102910 Cup required.   A11887-25TT BUY NOW
    REAR Live 30 A12086 BUY NOW TTEL29 BUY NOW 108Nm (80ftlb) 108Nm (80ftlb) 0.15-0.20mm (.006-.008") Suits non-thrust block model A12086-29TT BUY NOW
Rodeo
RA, RA7 1988-2007 FRONT Independent 17 A11556 BUY NOW TTEL11 BUY NOW 107Nm (79ftlb) 98Nm (72ftlb) 0.15-0.20mm (.006-.008") Does not suit some Rodeo's between 12/96 & 5/98 due to a different 3rd member and carrier. To get it to fit you can swap member out for an earlier one. A11556-11TT BUY NOW
    REAR Live 26 A11559 BUY NOW TTEL18 BUY NOW 108Nm (80ftlb) 108Nm (80ftlb) 0.15-0.20mm (.006-.008") Due to Isuzu casting differences this may require a different size shim to set the pre-load.Does not suit models 88-02 with thrust block centre A11559-18TT BUY NOW
    REAR Live 26 A12924 BUY NOW     108Nm (80ftlb) 108Nm (80ftlb) 0.15-0.20mm (.006-.008") Suits Thrust Block Centre models (1993-)    
Jackaroo
Jackaroo/UBS 1988-2002 FRONT Independent 17 A11556 BUY NOW TTEL11 BUY NOW 107Nm (79ftlb) 98Nm (72ftlb) 0.15-0.20mm (.006-.008") Does not suit some Jackaroo's between 12/96 & 5/98 due to a different 3rd member and carrier. To get it to fit you can swap member out for an earlier one. A11556-11TT BUY NOW
    REAR Live 23 A13444 BUY NOW           Suits vehicles with factory LSD    
    REAR Live 26 A11559 BUY NOW TTEL18 BUY NOW 108Nm (80ftlb) 108Nm (80ftlb) 0.15-0.20mm (.006-.008") Due to Holden casting differences this may require a different size shim to set the pre-load. A11559-18TT BUY NOW

MAZDA - Harrop ELocker Geschikt voor Mazda Voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECrown Wheel TorqueBearing Wheel TorqueBack LashCommentsTerrain Tamer Differential KitSTORE
BT-50 UN 2006-2011 FRONT Independent 30 A11474 BUY NOW  TTEL23 BUY NOW 68-83Nm (51-62ftlb) 73-107Nm (84-79ftlb) 0.09-0.11mm (.0035-.0043")    A11474-23TT BUY NOW
    REAR Live 32 A11471 BUY NOW  TTEL22 BUY NOW 95Nm (70ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010")    A11471-22TT BUY NOW
BT-50 UP UR 2011-8/2018 FRONT Independent 29 A11757 BUY NOW  TTEL24 BUY NOW 135Nm (100ftlb)   0.35-0.45mm (.013-.017) Off Pinio Bearing can be 2 different sizes. Check at install.  A11757-24TT BUY NOW
  2011-9/2020 REAR Live 32 A12608 BUY NOW  TTEL28 BUY NOW 150Nm (110ftlb) 75Nm (55ftlb) 0.15-0.25mm (.006-.010") Does not suit vehicles with OEM locking differential  A12608-28TT BUY NOW
BT-50 UR 2018-2020 FRONT Independent 29 A14408 BUY NOW TTEL24 BUY NOW 135Nm (100ftlb)   0.35-0.45mm (.013-.017) Off Pinio Confirm build date suits UR facelift September 2018 onward A14408-24TT BUY NOW
BT-50 TF 6/2020- FRONT Independent 29 A15305 BUY NOW TTEL11 BUY NOW       TF model facelife June 2020 onwards A15305-11TT BUY NOW

MERCEDES - Harrop ELocker voor Mercedes-voertuigen

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECrown Wheel TorqueBearing Wheel TorqueBack LashCommentsTerrain Tamer Differential KitSTORE
Class X220DD X250D 2017-2020 FRONT Independent 30 A13120 BUY NOW TTEL20 BUY NOW Then turn an aidditional 93Nm (69ftlb) 93Nm 0.10-0.15mm (.004-.006") Ratio 3.54 & Down Ratio needs to be confirmed before ordering A13120-20TT BUY NOW
    FRONT Independent 30 A13684 BUY NOW TTEL20 BUY NOW Then turn an aidditional 93Nm (69ftlb) 93Nm 0.10-0.15mm (.004-.006") Ratio 3.69 & Up Ratio needs to be confirmed before ordering A113684-20TT  

MITSUBISHI - Harrop ELocker voor Mitsubishi-voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECrown Wheel TorqueBearing Wheel TorqueBack LashCommentsTerrain Tamer Differential KitSTORE
Pajero
ND,NL 1987-2000 FRONT Independent 28 A11425 BUY NOW  TTEL33 BUY NOW 85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Front: Will not suit 7.25" Crown wheel A11425-33TT BUY NOW
    REAR Live 31 A11428 BUY NOW TTEL19 BUY NOW 152Nm (112ftlb) 78Nm (58ftlb) 0.13-0.18mm (.005-.007") 9.5" Crown wheel 3.5 V6 & 2.8TD, Bearing Inner LM603049, Outer LM603014  A11428-19TT BUY NOW
    REAR Live 28 A11970 BUY NOW     85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") 9.0" Crown wheel will not suit 3.5 V6 or 2.8TD    
    REAR Live 28 A13105 BUY NOW     152Nm (112ftlb) 78Nm (58ftlb) 0.13-0.18mm (.005-.007") 8.0" Crown wheel    
NM, NX 2000-Current FRONT Independent 28 A11425 BUY NOW  TTEL33 BUY NOW 85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Front: Will not suit 7.25"Crown wheel A11425-33TT BUY NOW
    REAR Independent 33 A12425 BUY NOW     152Nm (112ftlb) 78Nm (58ftlb) 0.13-0.18mm (.005-.007") 9.5" Crown wheel    
Triton
ME-MK 1998-2002 FRONT Independent 28 A11425 BUY NOW  TTEL33 BUY NOW 85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Will not suit 7.25" Crown wheel A11425-33TT BUY NOW
    REAR Live 28

A11970

 

 

BUY NOW

 

    85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007")

Suits 9" crown wheel non-thrust block centre

   
    REAR Live 28 A13905 BUY NOW     85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Suits thrust block variant rear    
 MK-MR 2002-2019  FRONT Independent 28 A11425 BUY NOW  TTEL33 BUY NOW 85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Will not suit 7.25" crown wheel A11425-33TT BUY NOW
    REAR Live 31 A11428 BUY NOW  TTEL19 BUY NOW 152Nm (112ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Suits 9.5" Crown wheel A11428-19TT BUY NOW
 MR  2020- REAR Live 28 A11428 BUY NOW TTEL19 BUY NOW 85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Suits 9.5" Crown wheel - will not suit factory Diff Lock A11428-19TT BUY NOW
    REAR Live 31 A15085 BUY NOW     152Nm (112ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Suits factory locker replacement    
CHALLENGER/PAJERO SPORT
PA-QE 1988-2016 FRONT Independent 28 A11425 BUY NOW     85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Will not suit 7.25" Crown wheel    
    REAR Live 31 A11428 BUY NOW TTEL19 BUY NOW 152Nm (112ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Suits 9.5" Crown wheel A11428-19TT BUY NOW
    REAR Live 28 A11970 BUY NOW     85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Suits 9.0" Crown wheel    
    REAR Live 28 A13105 BUY NOW     152Nm (112ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Suits 8.0" Crown wheel    
DELICA
L300 1986-1994 FRONT Independent 28 A11425 BUY NOW     85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Will not suit 7.25" Crown wheel    
    REAR Live 28 A13105 BUY NOW     152Nm (112ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") 8.0" Crown wheel    
  1994-2007 FRONT Independent 28 A11425 BUY NOW     85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") Will not suit 7.25" Crown wheel    
    REAR Live 28 A11970 BUY NOW     85Nm (63ftlb) 60Nm (44ftlb) 0.13-0.18mm (.005-.007") 9.5" Crown wheel, Bearing Inner LM603049, Outer LM603014     
GREAT WALL
V240 2006-2016 REAR Live 30 A12053 BUY NOW           Built-order    
JEEP
Gladiator/GT 2020- FRONT Live 32 A14989 BUY NOW           Dana 44 same different front & rear     
    REAR Live 32 A14989 BUY NOW           Dana 44 same different front & rear     
Wrangler/TJ 1997-2006 FRONT Live 27 63-19817-020 BUY NOW     75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010") 3.54 & down ratio Suits Dana 30 housing    
    FRONT Live 27 63-19818-020 BUY NOW     75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010") 3.73 & up ratio Suits Dana 30 housing    
    REAR Live 27 63-19821 BUY NOW     75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010") 3.54 & up ratio Suits Dana 35 housing C-Clip    
    REAR  Live 30 A19977 BUY NOW     75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010") Suit Dana 44 housing 3.73 & Down Ratio    
    REAR Live 30 63-19969-010 BUY NOW     75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010") Suits Dana 44 housing 3.92 Up ratio    
Wrangler/JK 2006-2016 FRONT Live 27 63-19817-020 BUY NOW     75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010") 3.54 & down ratio Suits Dana 30 housing    
      Live 27 63-19818-020 BUY NOW     75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010") 3.73 & up ratio Suits Dana 30 housing    
    REAR Live 30 A19977 BUY NOW     75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010") Suits Dana 44 housing all ratios    
Wrangler/JL 2020- FRONT Live 27 63-19817-020 BUY NOW     75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010") 3.54 & down ratio Suits 7.2" crown wheel    
      Live 27 63-19818-020 BUY NOW     75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010") 3.73 & up ratio Suits 7.2" crown wheel    
    REAR Live 29 A15359 BUY NOW           M200 Differential    

LDV - Harrop ELocker Geschikt voor LDV-voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #CommentsTerrain Tamer Differential Kit
T60 PRO 2017 -  REAR Live 32 A14816 BUY NOW      

MAHINDRA - Harrop ELocker Geschikt voor Mahindra-voertuigen

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #CommentsTerrain Tamer Differential Kit
S6, S10, S11 2022- FRONT Independent 27 A16421        
    REAR Live 30 A16422        

LANDROVER - Harrop ELocker Geschikt voor Landrover Voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECrown Wheel TorqueBearing Wheel TorqueBack LashCommentsTerrain Tamer Differential KitSTORE
Discovery
Discovery 1 /Discovery2 1993-2004 FRONT Live 24 A11301 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007) Rover Differential    
    REAR Live 24 A11301 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007) Rover Differential    
Defender
Defender 110, 130, County 1983-2014 FRONT Live 24 A11301 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007") Rover Differential    
    FRONT Live 24 A11870 BUY NOW     136Nm (43ftlb) 134Nm (99ftlb) 0.15-0.25mm (.006-.010") Ratio 4.10 & Down Suits Salisbury 8HA housing.    
    FRONT Live 24 A13201 BUY NOW     136Nm (43ftlb) 134Nm (99ftlb) 0.10-0.17mm (.004-.007") Ratio 4.56 & Up Suits Salisbury 8HA housing    
    REAR Live 24 A11301 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007") Rover Differential    
     REAR  Live  24 A11870 BUY NOW     136Nm (43ftlb) 134Nm (99ftlb) 0.15-0.25mm (.006-.010") Ratio 4.10 & Down Suits Salisbury 8HA housing.    
     REAR  Live  24 A13201 BUY NOW     136Nm (43ftlb) 134Nm (99ftlb) 0.10-0.17mm (.004-.007") Ratio 4.56 & Up Suits Salisbury 8HA housing    
     REAR  Live  24 A11415 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007") Suits P38A housing    
Defender 90 1983-2012 FRONT Live 24 A11301 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007") Rover Differential    
    REAR Live 24 A11301 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007") Rover Differential    
Perentie 6x6 1987-1993 FRONT Independent 24 A13178 BUY NOW TTEL25 BUY NOW 136Nm (43ftlb) 134Nm (99ftlb) 0.15-0.25mm (.006-.010") 4.65 and up ratio A13178-25TT BUY NOW
    REAR Live 24 A13201 BUY NOW     136Nm (43ftlb) 134Nm (99ftlb) 0.15-0.25mm (.006-.010") 4.56 and up ratio    
Range Rover
Series-1 1993-1998 FRONT Live 24 A11301 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007") Rover Differential    
    REAR Live 24 A11301 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007") Rover Differential    
P38A 1993 -  FRONT Live 24 A11415 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007") Suits P38A housing    
    REAR Live 24 A11415 BUY NOW     58Nm (43ftlb) 90Nm (66ftlb) 0.10-0.17mm (.004-.007") Suits P38A housing    

PORSCHE/VOLKSWAGEN - ELocker Geschikt voor Porsche en Volkswagen Voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #CommentsTerrain Tamer Differential Kit
Cayenne 995 & 997 2003-2010 FRONT IFS 37 A15117 BUY NOW    OE bearings can be used. (LM503349A & LM503310)  
Touareg 2002-2010 FRONT IFS 37 A15117 BUY NOW    OE bearings can be used. (LM503349A & LM503310)  

SSANGYONG - ELocker Geschikt voor Ssangyong-voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STORECrown Wheel TorqueBearing Cap TorqueBack LashBearing Kit Part #CommentsTerrain Tamer Differential Kit
Musson/Rexton/Corando 1996 - 2016 REAR Live 30 A19977 BUY NOW 75Nm (55ftlb) 81Nm (60ftlb) 0.15-0.25mm (.006-.010")   Ratio 3.73 &down suits Dana 44 housing  

 

SUZUKI - ELocker Geschikt voor Suzuki-voertuigen

 

Make & ModelYearFront/RearSuspSplineELocker Part #STOREBearing Kit Part #STORECommentsTerrain Tamer Differential Kit
Grand Vitara 2005- REAR Live   A13558 BUY NOW     IRS housing requies modifications, Requires OE carrier bearings